GATE VALVES
Fireguard Valves conforms to the latest version of AWWA standard C509 covering resilient seated gate valves for water
supply services. All valves design are optimized for consistent performance and are corrosion resistant. Fireguard Valves have an iron body, bonnet, and O-ring Plate. The wedge is totally encapsulated with rubber and the sealing rubber is permanently bonded to the wedge as per ASTM D429.All valves are supplied with O ring seals at all pressure retaining joints and no flat gaskets are used. They are opened by turning left or right and provided with 2” square operating nut or a hand wheel with word Open and an arrow to indicate the direction to open. Each valve casting have Fireguard name , Pressure rating and year in which it was manufactured and tested by Hydrostatic pressure equal to the requirements of AWWA C509.End connections include combinations of flanged, Grooved and mechanical joint. The valve is rated at 250 Psi to 300 Psi. Flange Conforms to ANSIB16.1 / B16.42 Class125/150FF or PN10/PN16
CHECK VALVES
Fireguard Check Valves
Fireguard UK Model FCF-01 Swing Check Valves are of Ductile Iron Body with bronze seat, swing type renewable composition seat and disc, flanged ends, Class 150 and UL Listed
Fireguard TEST & DRAIN VALVE
TEST & DRAIN is a 300 PSI rated single handle ball valve that was specifically designed to provide both the test function and the express drain function required for a wet fire sprinkler system. It features a tamper resistant test orifice, integral tamper resistant sight glasses, and a tapped port for system access. Fireguard TESTANDRAIN meets all the requirements of NFPA-13, NFPA-13R, and NFPA-13D. Available in 1″, 1-1/4″ and 2″ sizes in both NPT and BSPT
